 |
 |
 |
|
This is a tall cabinet that includes a Hafele pantry pullout and shelves in maple/champagne finish. This cabinet includes the cabinet case, pullout frame, and maple melamine shelves that have a coating that ensures the objects do not slide around (slightly sticky/rubber feel). Curious as to how many shelves are included? This depends on the height of the cabinet ordered. Cabinets ordered with HEIGHT of 48" to 68.50" will have four total shelves. 68.50" to 84" will have six total shelves. This assumes a 4" tall toe kick included in the HEIGHT of the cabinet.
DISCLAIMER: 1. The door will not have pre drilled holes. The customer will be required to drill 6 pilot holes on the backside of the door itself, using a small drill bit on site. See the included instruction sheet, or the pictures of the product on our website for info on the hole locations.
*Note, these holes required are outside of the tolerances set fourth by our drilling jigs. All pilot holes are drilled inside the cabinet itself, so you don't have to drill any of the holes that mount the pullout frame to the cabinets case (top, bottom) :)
How to install the door onto the tall HAFELE pantry pullout
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
QUICK FACTS
- This cabinet is shipped "ready to assemble".
See "Assembly Instructions" category for more info on how to assemble
your cabinets.
- Construction holes will be visible on the sides
of the cabinet once assembled. Finished end panels (ordered separately)
should be ordered to finish off the exposed cabinet sides after
installation.
- The interior of this cabinet will be real maple
wood veneer over a 3/4" Purebond Plywood (no VOC), finished with a clear
UV (baked-on, UV wood, No VOC). Purebond plywood is top-of-the-line and
Made in the USA.
- Doors, drawer fronts, drawer boxes, and face
of the cabinet case will be raw wood unless ordered with an optional
finish of your choice. See our "wood samples" category for available
finishes and corresponding edge banding material specifications.
- The
toe kick of the cabinet will show exposed plywood core. Real wood toe
skins (ordered separately) should be used to cover the face of the toe
kick once all cabinets are installed. See the "Millwork" category.
General Cabinet Specifications
- Construction- Full overlay, European style, frameless cabinet case construction
- Cabinet Case Interior
- Standard Cabinets- 3/4" thick Purebond plywood with a natural finished maple veneer (UV wood, baked on acrylate finish, scratch and dent resistant). Columbia Purebond plywood is formaldehyde free premium grade plywood (made in USA with North American lumber).
- Glass door and exposed interior cabinets- Unfinished/raw purebond plywood with wood veneer that matches the wood species and finish selected for the face of the cabinet case/doors.
- Drawer Boxes (if applicable)- 5/8" thick dovetailed drawer boxes (1/4" thick fully captured bottoms, 100 lbs capacity), fully assembled, then sanded, then sprayed with a natural CLEARCOAT conversion varnish to ensure smooth dovetailed joints (furniture grade).
- Drawer Slides (if applicable)- Blum Blumotion integrated soft closing/self closing under mounted drawer slides (heavy duty version, made in USA, 100 lbs capacity)
- Hinges (if applicable)-Blum Clip Top integrated soft closing/self closing hinges (heavy duty version, made in USA, fully adjustable)
- Finishing- Doors, drawer fronts, and face of cabinet are available
in raw wood (apply finish on site), or with one of our available conversion varnish based finishes already applied.
|
|
|
|
|
|
|
Excellent craftsmanship 
