 |
 |
 |
|
NOTES
This is a 1 door wall cabinet with mounting holes for the Blum Aventos HK lift. The door will flip up when opened and hold in the open position. The hardware also allows for the door to soft close onto the cabinet. This cabinets comes with a single adjustabel shelf inside.
DISCLAIMER:
This cabinet assembles like all of our wall cabinets using our standard assembly method. Additional steps to install the hardware are as follows:
1. Holes on the backside of the door must be measured and marked by the customer on site. The back of the door provided will not have any holes or marks on it when it arrives. Follow the video tutorial or see this picture for where to attach the plate to the door. Simply mark out where the holes are needed and drill directly into the wood using the hinge screws provided. No drilling needed, you can drill directly into the back of the door using the hinge screws provided.
QUICK FACTS
- This cabinet is shipped "ready to assemble".
See "Assembly Instructions" category for more info on how to assemble
your cabinets.
- Construction holes will be visible on the sides
of the cabinet once assembled. Finished end panels (ordered separately)
should be ordered to finish off the exposed cabinet sides after
installation.
- The interior of this cabinet will be real maple
wood veneer over a 3/4" Purebond Plywood (no VOC), finished with a clear
UV (baked-on, UV wood, No VOC). Purebond plywood is top-of-the-line and
Made in the USA.
- Doors, drawer fronts, drawer boxes, and face
of the cabinet case will be raw wood unless ordered with an optional
finish of your choice. See our "wood samples" category for available
finishes and corresponding edge banding material specifications.
- The
toe kick of the cabinet will show exposed plywood core. Real wood toe
skins (ordered separately) should be used to cover the face of the toe
kick once all cabinets are installed. See the "Millwork" category.
39,93,100,40,191,193,192
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
General Cabinet Specifications
- Construction- Full overlay, European style, frameless cabinet case construction
- Cabinet Case Interior
- Standard Cabinets- 3/4" thick Purebond plywood with a natural finished maple veneer (UV wood, baked on acrylate finish, scratch and dent resistant). Columbia Purebond plywood is formaldehyde free premium grade plywood (made in USA with North American lumber).
- Glass door and exposed interior cabinets- Unfinished/raw purebond plywood with wood veneer that matches the wood species and finish selected for the face of the cabinet case/doors.
- Drawer Boxes (if applicable)- 5/8" thick dovetailed drawer boxes (1/4" thick fully captured bottoms, 100 lbs capacity), fully assembled, then sanded, then sprayed with a natural CLEARCOAT conversion varnish to ensure smooth dovetailed joints (furniture grade).
- Drawer Slides (if applicable)- Blum Blumotion integrated soft closing/self closing under mounted drawer slides (heavy duty version, made in USA, 100 lbs capacity)
- Hinges (if applicable)-Blum Clip Top integrated soft closing/self closing hinges (heavy duty version, made in USA, fully adjustable)
- Finishing- Doors, drawer fronts, and face of cabinet are available
in raw wood (apply finish on site), or with one of our available conversion varnish based finishes already applied.
|
|
|
|
|
|
|