*the sink is not included with this cabinet

NOTES

• 1 1/2" thick plywood sink support fixed shelves ( 2 x 3/4" thick plywood fixed shelves)
• Open back allows easy access to plumbing at installation

This is a farm sink base cabinet with 2 doors and an adjustable opening for the farm sink. Please review your sink specs and order accordingly. In some cases of hand made sinks, you may want to order the farm sink opening slightly larger than the actual sink specs indicate. This is done in order to ensure that the sink will fit properly with shims and a piece of scribe molding to cover any gaps around the face of the sink where is meets the cabinet. Scribe molding is sold on the following link:

Scribe Molding

updates to this product added on 2-9-12
1. Sink shelf is 1.5" thick American made plywood secured by 16 steel bolts. This 1.5" thick sink shelf will support up to 400 lbs of weight (double the load rating required by most sink manufactures).
2. The new drain cutout will work with multiple locations. I have researched the location of most possible drain locations and adjusted the cutout accordingly.
3. After consulting a local plumber, we have modified the sink drain cutout to allow easier use of plumbing tools. Using a larger cutout allows faster installation of garbage disposals and drain setup by professionals.
-Chad Barker

UPDATES TO THIS PRODUCT ADDED 8-26-20
Cutout has been eliminated from the fixed shelves. This allows a more solid fixed shelf as customer to cut drain hole on site exactly where it is needed.

QUICK FACTS

• This cabinet is shipped "ready to assemble". See "Assembly Instructions" category for more info on how to assemble your cabinets.
• Construction holes will be visible on the sides of the cabinet once assembled. Finished end panels (ordered separately) should be ordered to finish off the exposed cabinet sides after installation.
• The interior of this cabinet will be real maple wood veneer over a 3/4" Purebond Plywood (no VOC), finished with a clear UV (baked-on, UV wood, No VOC). Purebond plywood is top-of-the-line and Made in the USA.
• Doors, drawer fronts, and face of the cabinet case will be raw wood unless ordered with an optional finish of your choice. See our "wood samples" category for available finishes and corresponding edge banding material specifications.
• Dovetailed Drawer boxes are assembled, sanded, and sprayed with a clear/natural conversion varnish finish for extreme durability and beauty.
• The toe kick of the cabinet will show exposed plywood core. Real wood toe skins or base molding (ordered separately) should be used to cover the face of the toe kick once all cabinets are installed. See the "Millwork" category.